Electric Baseboard
SB Features
SBST - Bottom intake, slope discharge
SBT - Bottom intake, top discharge
SBF - Front intake, top discharge
Two piece all aluminum, 14 gauge front and back.
Extended backs and fronts available.
- 4" junction boxes at each end.
- 3/4" EMT raceway standard.
- 1/2" and 3/4" knockouts.
- Control packages available.
- Multiple heater sections on one common back.
- C/UL Listed.
- Full length thermal limit switch.
- There are 5 painted finishes available.
- Custom finishes specified by the architect are available.
- Available with optional 2" pedestals and finished back.
- 1/4" pencil proof discharge grill.
- Accessories include: end caps, walltrims, splice plates, corner and blank sections.
- Cabinet size is 3"W x 5"H. (3"W x 6"H SBST)
- Available with built in thermostat or disconnect.
- Wattages from 100 to 250 watts per foot.
Control sections include 6" or 12" with: disconnect, thermostat, pneumatic relay, transformer relay, relay, fused disconnect or duplex receptacle. Optional built-in controls shall include thermostats (single and double pole) and disconnect switches.
LB Features
LBT - Bottom intake, top discharge
LBF - Front intake, top discharge
Two piece all aluminum, 14 gauge front and back.
- Extended backs and fronts available
- 4" junction boxes at each end
- 3/4" EMT raceway standard
- 1/2" and 3/4" knockouts
- Control packages available
- Multiple heater sections on one common back
- C/UL Listed
- Full length thermal limit switch
- There are 5 painted finishes available
- Custom finishes specified by the architect are available
- Available with optional 2" pedestals and finished back
- 1/4" pencil proof discharge grill
- Accessories include: end caps, walltrims, splice plates, corners and blank sections
- Cabinet size is 5"W x 7"H
- Available with built in thermostat or disconnect
- Wattages from 100 to 500 watts per foot
Control sections include 6" or 12" with: disconnect, thermostat, pneumatic relay, transformer relay, relay, fused disconnect or duplex receptacle. Optional built-in controls shall include thermostats (single and double pole) and disconnect switches.
